Eclipse Data Technologies AVN2210p GPS Receiver User Manual


 
Memorising Stations
Memorising Stations Manually
The selected station is memorised and the preset registration number and frequency
are indicated on the display.
To manually set additional selected stations for the remaining preset channels, repeat
this procedure for each channel.
If the stations have been stored in memory, selecting the preset channel with the
[MODE] button and the [VOL] rotary knob or pressing a switch between [1] and [6] on
the PND display will allow you to tune to that preset station.
Memorising Stations Manually on the PND Display
The selected station will be memorised.
To manually set additional selected stations at the remaining preset channels, repeat
this procedure for each channel.
Subsequently, when you listen to the radio you will be able to select stations by
touching the preset switches.
1
Tune into the station to be memorised for the preset channel.
2
Press the [MODE] button to select the rotary select mode.
3
Turn the [VOL] rotary knob to select one of the preset channels P1 to P6.
4
Press the [ENTER] button until "PMEMORY" appears on the sub display.
1
Tune into the station to be memorised.
2
Press the [SCREEN] button and switch the display to the audio screen.
3
Touch and hold the preset switch where you want to memorise the station until
"P
MEMORY" appears on the sub display.