Filter
Top Products
-
7
-
Wire colors and connection points for connection wires
,,,,,
and
7
65
432
Never connect the power supply to the speaker wires (No.6 and No.7),
otherwise it will cause damage to the main unit.
Caution
B+ (Yellow)
Connect where power is constantly available, regardless of the ignition key's position.
ACC (Red)
Connect where the power comes on when the ignition is in the ACC position.
Illumination power supply (Orange/White)
Connect to where power comes on when the vehicle light switch is turned on.
Antenna power supply (Blue)
Connect to the automatic-antenna control terminal of the vehicle.
Control power supply (Blue/White)
Connect to the control terminal for the external amplifier, etc.
Front speaker output wires
Connect to the front speakers. White: Left + White/Black: Left -
Gray: Right + Gray/Black: Right -
Rear speaker output wires
Connect to the rear speakers. Green: Left + Green/Black: Left -
Purple: Right + Purple/Black: Right -
No connection (Pink)
Ground (Black)
Vehicle speed pulse signal wire (Purple/White)
Connect to the vehicle speed pulse signal terminal.
Parking brake signal wire (Red/White)
Connect to the parking brake signal terminal.
Reverse signal wire (Green)
Connect the reverse signal output of the vehicle to this terminal.
Front line-out terminals
Connect to the RCA connector of an external amplifier.
Rear line-out terminals
Connect to the RCA connector of an external amplifier.
Line-out terminals (Sub-woofer)
This is used for non fader output. It can be used as a sub-woofer terminal if a separate amplifier with
a low bass filter is connected.
Genuine steering remote control terminal
Connect to the vehicle steering remote control.
Compatible vehicle models for installation : Vehicles with voltage detection-type steering remote control.
Ask your dealer for details.
12
11
10
9
8
7
6
5
4
3
2
1
Español Français Italiano
Nederlands
SvenskaEnglish
F
D
E
C