Filter
Top Products
-
12
-
System connection e
System connection e
xample
xample
••
Install and connect all of the peripheral units before connecting them to the main unit.
••
Do not remove any of the protective caps (RCA, etc.) unless in use.
••
Be sure to wrap the connection wires with tape (PVC tape) to insulate them.
Tip
••
Never cut the insulation on the power wire or use it to power any other main unit. If the rated current
capacity of the power wire is exceeded, fire and electric shocks may result.
••
The wires should be secured with tape or a similar securing method to prevent any obstructions while
driving. If they get wound or entangled around components such as the steering wheel, shifting lever,
or brake pedal, accidents may result.
••
If removing the end of the wire to connect to another wire, be sure to wrap PVC tape or a similar wire
insulating method around the connection to insulate it. If the connection is not insulated, fire or
accidents may result.
Black
TO GROUND
Yellow
Yellow
Red
Red/White
Blue
Blue/White
FRONT
SPEAKERS
INTERCONNECTING WIRES
(Power and front speaker wires)
2
INTERCONNECTING WIRES
(Rear speaker wires)
3
TO EXTERNAL VIDEO EQUIPMENT
(Remove caps when using external video
equipment)
GPS ANTENNA
13
INTERCONNECTING WIRES
(Sub-woofer, line out, and steering remote control connector)
4
MAIN UNIT
1
Yellow
White
Red
20P
4P
6P
1P
10P
13P
2P
English Español Français Italiano
Nederlands
SvenskaEnglish
NO CONNECTION
6P
5P
Green
Orange/White
5P
INTERCONNECTING WIRES
(Video input)
7
Red
White
INTERCONNECTING WIRES
(Video output and RSE)
6
TO SUB-WOOFER
(Remove caps when using external
S
ub-woofer)
FROM EXTERNAL VIDEO EQUIPMENT
(Remove caps when using external video
equipment)
INTERCONNECTING WIRES
(Speed pulse, parking
brake, reverse)
5
13P
TO GROUND
20P
POWER
CONNECTOR WIRE
(Supplied with CD changer)
REAR
SPEAKERS
Black
Yellow
Pink
DIN WIRE
(Supplied with CD changer)
TO BATTERY+12V(Permanent Supply)
TO VEHICLE SPEED PULSE SIGNAL TERMINAL
(Refer to page 10)
TO PARKING BRAKE SIGNAL (Refer to page 11)
TO REVERSE SIGNAL(Refer to page 11)
TO BATTERY+12V
(Permanent Supply)
TO ACC (Power Supply)
TO HEAD LIGHT SWITCH (Illumination (+))
TO POWER ANTENNA RELAY (Supply)
TO TURN-ON WIRE OF EACH EQUIPMENT (Supply)
FRONT
REAR
(Remove caps when using external amplifier)
TO STEERING REMOTE CONTROL
ANTENNA PLUG
BEC105
(sold separately)
NO CONNECTION
CH3083
(sold separately)
Blue/White
Purple/White