Eclipse - Fujitsu Ten AVN2210p GPS Receiver User Manual


 
WARNING
Do not place foreign objects in the disc insertion slot or USB input terminal. Fires or shocks may result.
Do not disassemble or alter this main unit. Accidents, fires or shocks may result.
Do not let water or foreign objects enter the internal parts of this main unit. Smoke, fires or shocks may result.
Do not use when main unit is malfunctioning (the screen is not lit or no sound comes out). Accidents, fires or
shocks may result.
Always replace fuses with fuses of identical capacity and characteristics. Never use a higher capacity fuse than
the original. Using the wrong type of fuse may cause a fire or severe damage.
If foreign objects or water enters the main unit, smoke comes out, or there is a strange odor, stop using it
immediately, and contact your dealer. Accidents, fires, or shocks may result if you continue to use it in these
conditions.
The driver should not change the CD or USB memory while driving. Accidents may occur as a result of not
paying attention to your driving, you must first stop or park your car in a safe location and then proceed to
remove or insert the CD and/or USB.
Plastic bags and wrappings may cause suffocation and death. Keep away from babies and children. Never place
bags or wrappings over anyone's head or mouth.
CAUTION
Wiring and installing this main unit requires expertise and experience. Professional installation is recommended.
Consult with your dealer or a professional installer. Incorrect wiring may damage the main unit or interfere with
safe vehicle operation.
Use only the accessory parts as specified. Using other parts may cause damage to the main unit or cause parts
to dislodge and fall or fly off the main unit.
Do not install the main unit in places where it may be exposed to dew condensation on (around the air
conditioning hose, etc.), come in contact with water, or in conditions of high moisture, dust or oily smoke. If
water, moisture, dust or oily smoke enters this main unit, smoke, fires or malfunctions may result.
Do not install in places with direct sunlight or where it will be hit directly by hot air from the heater. This may
increase the interior temperature of this main unit, resulting in fires and malfunctions.
Do not impede the air flow of the heat sink or vents of this main unit. Impeding the air flow will cause the interior
of the main unit to overheat, and fires may result.
Connect as specified in the installation manual. If not connected correctly, fires or accidents may result.
Install wiring in a manner in which they are not pinched by movable parts such as seat rails, and screw parts of
the vehicle body. Accidents, fires and shocks may result from disconnection and electrical shorts.
Install wiring in a manner in which they do not make contact with metal parts. The wiring maybe be damaged by
contact with metal parts, resulting in fire and shocks.
Avoid any contact with hot surfaces when wiring the main unit. High temperatures may damage wiring, causing
shorts, arcing and fires.
When changing the installation location for this main unit, please consult the dealer where you bought it for
safety reasons. Expertise is necessary for removal and installation.
Keep volume to a reasonable level so that you can hear sounds from outside the vehicle, including warning
sounds, voices, and sirens. Failure to do so may cause an accident.
Be careful that hands and fingers are not pinched when adjusting the tilting angle or closing display. Injuries
may result.
Do not put your hands or fingers into the disc insertion slot or USB input terminal. Injuries may result.
Do not touch heat dissipating parts of the main unit, burn may result.
Volume should be set at a moderate level to avoid hearing damage when the main unit is powered on.
Do not operate when the sound is not being emitted properly such as distortion.
This main unit uses invisible laser light. Do not disassemble or alter this main unit. If trouble occurs, contact the
dealer where you bought the main unit.
Altering this main unit may cause exposure to laser emissions (worsening eyesight), or result in accidents, fires
or shocks.
If the main unit is dropped or the cosmetics appear broken, turn off the power to the main unit and contact your
dealer. If used in this condition, fires or shocks may result.
Using the vehicle speed pulse signal, you can use the route guidance function even in the locations where
usually no guidance is given (example: in a tunnel). However, the accuracy of the guidance is not guaranteed
since the guidance is performed using the information about road surface condition and vehicle speed.