Filter
Top Products
USER’S MANUAL XNAV3550
- 72 - Next destination
7.2 Next destination
This function is only available in "Extended mode".
For information on how to change the user mode, please refer to
"
Changing the user mode".
Next destination Next destination
This function is only available when you are navigating a route
with at least one stopover and when you are working in extended
mode.
Use this function if you want to skip the next stopover.
Example: You have planned an itinerary from your office to
"Company A" and then to "Company B" and you are already on
your way. Before you arrive at "Company A", a mobile phone call
informs you that you need not visit Company A.
Tap the Next destination button to navigate to the stopover
after the next (here: "Company B").
The system recalculates the route. "Company B" will be your next
destination.
7.3 Blocking a route section
Blocking a route
section manually
You may block a route section manually in order to evade it.
Manual blocking forces a recalculation of the route.
Presume that you are driving on a freeway and a radio message
announces a traffic jam 4 miles ahead of your current position.
With the "Block route sections" function you may instruct the
navigation system to evade the announced traffic jam.
A manual blocking is only valid for the current navigation
process. The respective route section will be unblocked for the
next navigation or when you restart the software.
Blocking a route
section…
Precondition
: The navigation system is in navigation mode and
the map is being displayed.
1. Tap this icon.
2. Tap Block road.
The B
LOCKING screen opens.
3. Enter how many miles (from your current position on) you
want to block.
4. Tap OK.