Filter
Top Products
Dodge Engineering & Controls, Inc.
Toll Free (877) 334-2875 Fax: (978) 244-1422
Installation
ES142 Spring Return Electronic Actuators
129-270 EAI/ES-18 DEI, Inc.
ACCESSORIES
NOTE: The auxiliary switches and/or the control signal adjustment cannot be added in the field. Order the
product number that includes the option(s), if required.
EA0477R2
(4 each)
Figure 1. Floor Mount Kit.
ASK71.1U This kit allows foot mounting of the ES142
actuator. This kit should be used for
in-the-airstream applications, and generally, anywhere
a foot-mounted actuator can be mounted.
This kit contains a crank arm that changes the angular
rotation into a linear stroke, a support bearing ring to
minimize side loading on the actuator’s output bearing,
a mounting bracket, and required mounting fasteners.
EA0476R2
Figure 2. Frame Mount Kit.
ASK71.2U This kit allows mounting of the ES142
actuator directly to a damper frame. This kit should be
used with louvers and vents, and in applications where
use of the floor mount kit is not possible.
This kit contains a crank arm that changes the angular
rotation into a linear stroke, a support bearing ring to
minimize side loading on the actuator’s output bearing,
a mounting bracket, and required mounting fasteners.
EA0495R1
Figure 3. Crank Arm Kit.
ASK71.3 This kit allows a direct coupled actuator to
provide an auxiliary linear drive. This crank arm kit can
be used to simultaneously drive a set of opposing or
adjacent dampers with a single actuator.
This kit includes a crank arm that attaches to the
splined hub of the shaft adapter, and other required
mounting fasteners.
EA0494R1
Figure 4. Crank Arm Kit with Mounting Bracket.
ASK71.4 This kit allows economical mounting of an
actuator to a variety of surfaces. This kit should be
used in applications where the actuator can be rigidly
surface mounted and a linear stroke output is required.
This kit includes a crank arm that attaches to the
splined hub of the shaft adapter, a mounting bracket,
and other required mounting fasteners.