Filter
Top Products
temperature is adjusted automatically to maintain the
desired comfort level. You can adjust the temperature by
pressing the + or - Temp rocker switches.
FAN Control
Use this knob to regulate the amount of air delivered
through the system in any mode you select. Rotation
of the knob to increase (clockwise) or decrease (counter-
clockwise) fan speed.
Air Conditioning Operation
Press this button to enable the air conditioning
system. Compressor operation is automatic when
you press the AUTO button and no snowflake is
shown. A snowflake indicates that the A/C system is
enabled. The snowflake will not be displayed in AUTO
mode even though the A/C system is enabled.
The compressor may operate at any temperature above
32°F (0°C).
Recirculate Button
The Hybrid vehicle automatically uses a range of recir-
culation from all outside air to full recirculation (vehicle
cabin air) to improve air conditioning efficiency. To
request additional outside air push the recirculation
button to turn the recirculation indicator on, then push
the button again to cycle the indicator off. This will
provide more fresh air to the cabin. Press the auto button
to return to efficiency recirculation.
Press the RECIRC button to recirculate the air
inside the vehicle. Outside air is temporarily
prevented from entering the vehicle. Use this
mode to block out any outside odors, smoke,
dust or when rapid cooling of the interior is required.
UNDERSTANDING YOUR INSTRUMENT PANEL 45
4