Filter
Top Products
The Vehicle Security Light will also illuminate for ap-
proximately three seconds when the ignition is first
turned ON.
12. Anti-Lock Brake (ABS) Warning Light
This light monitors the Anti-Lock Brake System
(ABS) which is described in the Owner’s
Manual. This light will come on when the
ignition key is turned to the ON position and
may stay on for approximately three seconds. If this light
remains on or comes on during driving, it indicates that
the Anti-Lock portion of the brake system is not func-
tioning and that service is required. See your authorized
dealer immediately. With the ABS malfunctioning, the
Brake Assist System (BAS) and Electronic Stability Pro-
gram (ESP) are also switched off. Both malfunction
indicator lights illuminate with the engine running. If the
charging voltage falls below 10-Volts, the malfunction
indicator light illuminates and the ABS is switched off.
When the voltage is above this value again, the malfunc-
tion indicator light should go out and the ABS is opera-
tional. If the malfunction indicator light stays illumi-
nated, have the system checked at your authorized dealer
as soon as possible.
13. Oil Pressure Warning Light
This light indicates that the engine oil pressure has
become too low. For a bulb check, this light will
illuminate momentarily when the ignition is turned ON.
If the light comes on while driving, stop the vehicle and
shut off the engine as soon as possible. See your autho-
rized dealer for service immediately.
14. Hybrid Gauge
This gauge indicates in what mode the vehicle is being
operated. Refer to “Hybrid Gauge” under “Instrument
Panel And Controls”, in this Section of the supplement.
26 UNDERSTANDING YOUR INSTRUMENT PANEL