Dodge 2009 Dakota Automobile User Manual


 
Tether Straps at the Rear Passenger Seat (Crew Cab)
1. Route the child restraint tether strap under the head
restraint for the outboard seating positions, and then
through the anchor strap outer loop (webbing material
loop), located directly behind the child restraint.
2. Route the tether strap across to the nearest installed
anchor strap, and attach the tether strap hook to the
anchor strap inner metal ring.
3. Remove the slack in the tether strap so that both
anchor straps are pulled tight.
NOTE: Two anchors must be used for any of the three
seating positions.
Multiple Child Restraints
1 Inner Anchor Strap Rings 4 — Passenger Side Rear Child
Seat
2 Snap Hook 5 Center Rear Child Seat
3 Tether Strap 6 Drivers Side Rear Child
Seat
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69
2