Filter
Top Products
UNDERSTANDING YOUR INSTRUMENT PANEL 119
4
Ventilation
1. Set the airflow control (2) to position 3 or 4.
2. Set the temperature control (1) as illustrated (heater
switched off).
3. Set the air distribution control (3) to h.
NOTE: Adjust the air vents as required, refer to "Side
Air Vents and Center Air Vents".
Air Recirculation
Air recirculation indicator lamp (1)
Air recirculation button (2)
To switch on air recirculation:
• Press the air recirculation button – the indicator
lamp lights up.
To switch off air recirculation:
• Press the air rescirculation button again – the
indicator lamp goes out.