Dodge 2006 LX Charger Automobile User Manual


 
www.jeep.com/uconnect
The following are general phone to UConnect System
pairing instructions:
Press the Phone button to begin.
After the ЉReadyЉ prompt and the following beep, say
ЉSetup Phone Pairing.Љ
When prompted, after the voice on beep, say ЉPair a
Phone.Љ
You will be asked to say a four-digit pin number which
you will later need to enter into your cellular. You can
enter any four-digit pin number. You will not need to
remember this pin number after the initial pairing
process.
The UConnectsystem will then prompt you to begin
the cellular phone pairing process on your cellular
phone. Before attempting to pair phone, please see
your cellular phones user manual (Bluetooth section)
for instructions on how to complete this step.
For identification purposes, you will be prompted to
give the UConnect system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
You will then be asked to give your cellular phone a
priority level between 1 and 7, 1 being the highest
priority. You can pair up to seven cellular phones to
your UConnectsystem. However, at any given time,
only one cellular phone can be in use, connected to
your UConnect System. The priority allows the
UConnect system to know which cellular phone to
use if multiple cellular phones are in the vehicle at the
same time. For example, if priority 3 and priority 5
phones are present in the vehicle, the UConnect
system will use the priority 3 cellular phone when you
make a call. You can select to use a lower priority
cellular phone at any time (refer to ЉAdvanced Phone
ConnectivityЉ).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 73
3