![](http://pdfasset.owneriq.net/b/f2/bf22033a-a970-4f78-84ed-7d00b5d064c6/bf22033a-a970-4f78-84ed-7d00b5d064c6-bgef.png)
7
Chassis
Retaining screws
Clearance lamp, R5W - 12V 5W
Turn signal lamp, P21W - 12V 21W
Stop lamp, P21W - 12V 21W
Taillamp, R5W - 12V 5W
Backup lamp, P21W - 12V 21W
License plate lamp (driver‘s side only),
R5W - 12V 5W
1. Loosen retaining screw a and remove lamp
housing.
2. To change a bulb, press the bulb into the bulb
socket, turn it counterclockwise and remove.
3. Insert the new bulb.
4. Install lamp housing.