Directed Electronics 5701 Automobile Alarm User Manual


 
© 2008 Directed Electronics—all rights reserved
39
Power Saver in Valet Mode: When the system enters Valet Mode the
Status LED on the Responder LE control center illuminates steadily. If
the vehicle is not used (ignition is not turned on) for a one hour pe-
riod while the system is in Valet Mode, the status LED will shut off. If
the system remains in Valet Mode, the LED will come back on the next
time the ignition is turned on and then back off.
2-way remote
Your Responder LE 2way remote control has a feature called remote
power save mode. When programmed ON under remote options, the
remote will conserve power by disabling the paging function if unused
for more than 72 hours. Pressing any button on the remote will restore
the paging function.
The default setting is ON. See Remote control programming section of
this guide or ask your dealer for details on how to program.