Filter
Top Products
2200
sseeccoonnddaarryy hhaarrnneessss ((HH22)) wwiirree ccoonnnneeccttiioonn gguuiiddee
This wire sends a negative pulse every time the remote start is activated or the doors are unlocked. This can be
used to pulse the disarm wire of the vehicle's factory anti-theft device. Use a relay to send a (-) or (+) pulse to
the disarm wire as shown in the following diagrams.
RReellaayy ffoorr NNeeggaattiivvee ((--)) DDiissaarrmm WWiirree RReellaayy ffoorr PPoossiittiivvee ((++)) DDiissaarrmm WWiirree
This wire sends a negative pulse every time the remote start shuts down or the doors are locked. This can be
used to pulse the arm wire of the vehicle's factory anti-theft device. Use a relay to send a (-) or (+) pulse to the
arm wire.
This wire provides 200 mA programmable output. (See
Feature Descriptions
section of this guide.)
IIMMPPOORRTTAANNTT!!
Never use this wire to drive anything but a relay or a low-current input! This tran-
sistorized output can only supply 200 mA, and connecting directly to a solenoid, motor, or other
high-current device will cause the module to fail.
This wire provides 200 mA programmable output. (See
Feature Descriptions
section of this guide.)
IIMMPPOORRTTAANNTT!!
Never use this wire to drive anything but a relay or a low-current input! This tran-
sistorized output can only supply 200 mA, and connecting directly to a solenoid, motor, or other
high-current device will cause the module to fail.
HH22//44 VVIIOOLLEETT//BBLLAACCKK cchhaannnneell 55 oouuttppuutt
HH22//33 GGRREEEENN//WWHHIITTEE 220000 mmAA ((--)) pprrooggrraammmmaabbllee cchhaannnneell 44 oouuttppuutt
HH22//22 GGRRAAYY//BBLLAACCKK ffaaccttoorryy aallaarrmm rreeaarrmm
HH22//11 LLIIGGHHTT GGRREEEENN//BBLLAACCKK ((--)) ffaaccttoorryy ddiissaarrmm oouuttppuutt