Filter
Top Products
5
©
2001 Directed Electronics, Inc.
Transmitter Functions
The receiver uses a computer-based Learn Routine to learn the
transmitter buttons. This makes it possible to assign any button on
the remote transmitter to any receiver function. Two possible
transmitter configurations are described in this section. Remember
that there are many alternate custom configurations that can be
programmed by your dealer.
The standard configuration is how the transmitters come programmed
initially. If you would like a custom configuration, contact an
authorized dealer.
Button I
The arm, disarm, and panic functions are usually controlled by
pressing .
Button II
Silent Mode
™
, Remote Valet
®
, and optional trunk release (if
equipped) functions are usually controlled by . (Silent Mode
and Remote Valet work by pressing for less than one second.
Trunk release requires you to press and hold for 1.5 seconds.)
Button III
An optional auxiliary convenience or expansion function that you
may have added to your system can be activated by pressing .
This auxiliary output controls _____________________________.
Standard Configuration