Filter
Top Products
21
©
2001 Directed Electronics, Inc.
the VRS sequence. If the unit loses power at any time during the
VRS sequence, when the unit is powered back up it will automati-
cally resume the VRS full trigger sequence.
Programming Options
Programming options control how your system performs during
normal operation; however, some options may require additional
installation parts and installation labor. Factory default program
settings are indicated in bold:
■ Active arming (transmitter only) or passive arming (automatic
arming 30-seconds after the last door has been closed).
■ Arming/disarming confirmation siren chirps on or off.
■ Passive door locking (with passive arming) or active door
locking (only when arming with the transmitter). This feature
only works if passive arming has been programmed on.
■ The ignition controlled door lock feature on or off: With this
feature on, the vehicle doors will lock 3 seconds after the
ignition is turned on, and unlock when the ignition is turned
off. The system can also be programmed to prevent the door
from locking when the ignition is turned on with any door
open. If your installer is programming the system with a
personal computer and the TechSoft Programmer, ignition
lock and unlock are independent features and can be pro-
grammed separately.