Filter
Top Products
User guide P.9
• Turn the ignition key to the IGNITION ON (RUN) position.
• Press and hold the
button until the parking lights come ON for 2 seconds, pause,
and then flash once.
If Safe Start is enabled, you can activate Cold Weather Mode by:
• Pressing and releasing the
button, then, pressing and holding the button until the
parking lights flash 3 times.
To verify whether the system is in Cold Weather Mode (automatic transmissions only):
• Press the brake pedal:
• If the vehicle is in cold weather mode, the parking lights will remain ON while the
brake pedal is pressed.
ExtendedRunTime
With the vehicle running under a remote start, pressing and holding the button for more than 3
seconds will reset the run time counter to zero and restart the run time cycle from the beginning.
• The horn (if programmed) will honk once;
• The parking lights will flash slowly 3 times then remain lit.
To stop the vehicle at any moment, simply press the STOP button. This procedure can only be
carried out once per remote start.
Example: If your Module is programmed for a runtime of 3 minutes and your vehicle has been
running for 2 minutes already, pressing the button will reset the counter to zero and the Engine
will run for another cycle (in this case, 3 minutes).
Disable/EnableLEDflashing
To disable the LED: Press and simultaneously until the parking lights flash three
times.
To Enable the LED: Press and simultaneously until the parking lights flash once.
Constantoutput
• Pressing and holding the button for more than 3 seconds will lock all doors and will
send a constant pulse as long as the
button is held down (maximum of 15 seconds).
This constant pulse can be configured to activate certain functionalities such as rolling up
the windows – Please refer to your installer to see if your vehicle is compatible with
this option.
• Pressing and holding the
button for more than 3 seconds will unlock all doors and will
send a constant pulse as long as the button is held down (maximum of 15 seconds).
This constant pulse can be configured to activate certain functionalities such as rolling
down the windows – Please refer to your installer to see if your vehicle is compatible
with this option.