Filter
Top Products
P. 12 User Guide
activated, panic mode is enabled. If horn confirmation is disabled, panic mode will not
be available.
HornChirpTiming
The pulse duration can be configured by your installer (from 5 ms to 200 ms).
MulticarOperation
This option allows the owner of two vehicles, both equipped with the same Remote Car Starter
model, to control both systems with a single remote control. To control the second vehicle,
simultaneously press the
TRUNK button and the button of the function you wish to use.
Note: Your remote control must be configured for second car operation by the installer.
Press TRUNK + LOCK buttons simultaneously: ....... LOCK
Press
TRUNK + UNLOCK simultaneously: ................. UNLOCK
Press
TRUNK + START simultaneously: ................... START
Press
TRUNK + STOP simultaneously: ..................... STOP
Press
TRUNK + START simultaneously for 3 sec: ..... Cold Weather Mode
OEMStyleAlarm
The OEM-style alarm (if configured by your installer) monitors the doors, hood and ignition switch
of your vehicle. It will sound the horn if a door or the hood is opened, or if the key is turned in the
ignition.
• To arm the OEM-style alarm, press the
button on the transmitter.
-The OEM-style alarm will ONLY arm if the
button on the transmitter is pressed.
-The LED on the antenna will flash slowly to indicate that the OEM-style alarm is now armed.
• To disarm the OEM-style alarm, press the
button on the transmitter.
-To stop the horn from sounding if the OEM-style alarm is triggered, press the
or
button, or put the system in and out of Valet Mode (page-7)
CarFinder
If configured by your installer, the Car Finder option will help you locate the vehicle by sending a
pulsating signal through the horn. To hear the signal, press and hold the
or button. This will
produce a pulsating signal for the time you keep the button pressed.
IntrusionCodesviahorn
The system monitors the following:
• Doors
• Hood
• Ignition
Note: If an intrusion has occurred the HORN will sound for a maximum of 1minute.
If an intrusion has occurred and
pressed, the horn provides an intrusion code corresponding to
the type of intrusion that occurred.
1x = power interruption 4
x = Doors intrusion
3x = Hood 6x = Ignition