Filter
Top Products
40
© 2008 Directed Electronics. All rights reserved.
Comfort closure• is a programming option which closes the vehicle’s win-
dows after remote locking.
Note: Comfort closure can only be used on cars that have the capability
of closing the windows (and on some cars the sunroof as well) with the key
cylinder in the door.
Convenience expansions
Listed below are some of the expansion options available. Please consult your
dealer for a complete explanation of all the options available to you.
Factory Alarm Trigger Notification:
This system has an input that can be connected to the horn circuit in the vehicle.
If the vehicle has a factory alarm and is controlled by this system (for lock/un-
lock), the remote reports when the factory alarm has been triggered. When the
factory alarm is triggered the remote screen displays the alarm icon and "alarm
door open" is displayed in the text area.
Note: The remote must be in range and the system locked to receive the report.
The system does not report that the factory alarm has been triggered when
unlocking with the remote.
Power Trunk Release: The accessory output of the system can operate a factory
power release for the vehicle’s trunk or hatch. Sometimes an optional relay is
required. If the factory release is not power-activated, Directed®’s 522T trunk
release solenoid can often be added.
Power Window Control: Automatic power window control is provided with
the 529T and 530T systems. These can operate power windows, and can roll
them up automatically when the system is Locked, roll them down, or both up
and down.