Filter
Top Products
32 © 1999 Directed Electronics, Inc. Vista, CA
tach learning
1. Start the vehicle with the key.
2. Within 5 seconds, press and hold the Valet/Program switch.
3. The LED will light constant when the tach signal is learned.
4. Release the Program switch.
operating settings learn routine
The System Features Learn Routine™ dictates how the unit operates. Due to the number of features, the features
have been divided into two menus. It is possible to access and change any of the feature settings using the
Valet®/Program switch. However, this process can be greatly simplified by using the optional DEI® Bitwriter™ or
996T Personal Computer Interface. Any of the settings can be changed and then assigned to one of up to four
transmitters, a feature called Owner Recognition. Each time that particular transmitter is used to disarm the
system, the assigned feature settings will be recalled. Owner Recognition is only possible when programming the
unit via the 996T or the 998T DEI® Bitwriter™.
Using the optional DEI® Bitwriter™ or PC Interface, the learn routine may be locked. Make sure the learn routine
is unlocked before programming features. If the horn generates one long honk when attempting to program the
unit, the learn routine is locked and must be unlocked using the DEI® Bitwriter™ or PC before proceeding.
The programmable operating settings of this unit can be changed whenever necessary through the computer-
based Learn Routine. The Valet®/Program push-button switch, plugged into the blue port, is used together with
a programmed transmitter to change the settings. To program settings, remember: Key, Select Menu, Choose,
Transmit and Release.
DRW-96
to learn the tach signal