Filter
Top Products
© 1999 Directed Electronics, Inc. Vista, CA 11
wiring the control unit
The wiring harness supplied with this unit is the standard 12-pin harness used by DEI® security systems. Three
wires in the plug are not used. The upgrade from this unit to a security system would simply require unplugging
and exchanging control units and connecting the necessary wires to the vehicle. The functions of all the wires
that are used in the primary harness are displayed in the following wiring diagram and their connections are
described in the wire connection guides.
primary harness (H1) wiring diagram
______
______
______
______
______
______
______
______
______
______
______
remote start ribbon harness wiring diagram
______
______
______
______
______
PURPLE (-) 200 MA STARTER RELAY TURN-ON
ORANGE (-) 200 MA ACCESSORY RELAY TURN-ON
PINK (-) 200 MA IGNITION RELAY TURN-ON
YELLOW (+) IGNITION INPUT TO REMOTE START
RED (+) CONSTANT POWER
1
2
3
4
5
RED/WHITE (-)200 MA CHANNEL 2 PROGRAMMABLE OUTPUT
RED (+) CONSTANT POWER INPUT
BROWN (-) HORN H0NK OUTPUT
NO WIRE
BLACK (-) CHASSIS GROUND INPUT
VIOLET NO FUNCTION
BLUE NO FUNCTION
GREEN NO FUNCTION
BLACK/WHITE (-)200 MA DOMELIGHT SUPERVISION OUTPUT
WHITE/BLUE (-) ACTIVATION INPUT
WHITE (+)/(-) SELECTABLE LIGHT FLASH OUTPUT
ORANGE (-) 500 MA ARMED OUTPUT
H1/1
H1/2
H1/3
H1/4
H1/5
H1/6
H1/7
H1/8
H1/9
H1/10
H1/11
H1/12