Filter
Top Products
Programming options
Programming options control your system’s normal, operational set-up.
Most options do not require additional parts, but some may require
installation labor. See your authorized Directed dealer for more details.
The following is a list of the programmable options, with the factory
settings in Bold.
• Active arming (transmitter only) or Passive arming (automatic arm-
ing 30 seconds after the last door has been closed).
• Arming/disarming siren chirps On or Off.
• The ignition controlled door lock feature On or Off: When this fea-
ture is programmed on, the doors will lock three seconds after the
ignition is turned on, and unlock when the ignition is turned off. If
your installer is programming the security system with the Directed
Bitwriter, ignition lock and unlock are independent features that
can be programmed separately.
Important: The vehicle doors must be closed for the ignition lock
feature to work.
• Passive door locking (with passive arming) or Active door locking
(only when arming with the transmitter). Passive locking allows the
vehicle’s doors to lock when the security system passively arms
(after the 30-second countdown). This feature only works if passive
arming has been programmed.
• Panic mode Enabled/Disabled when the ignition is turned on.
(Some states have laws against sirens sounding in moving cars.)