Filter
Top Products
11
© 2002 directed electronics, inc.
pprrooggrraammmmiinngg ooppttiioonnss
Programming options control your system's normal, operational
set-up. Most options do not require additional parts, but some may
require additional installation labor. This system's programming
options are listed below, with the factory default settings in
bboolldd
:
➤ Passive Mode or
AAccttiivvee MMooddee
. In Passive Mode the Failsafe
®
Starter Kill will automatically activate 30 seconds after the
ignition has been turned off.
➤ Ignition switch-controlled door-locking
oonn
or off. With this
feature on, the doors will lock 3 seconds after the ignition
key is turned on, and unlock when the ignition key is turned
off.
➤ Passive Locking or
AAccttiivvee LLoocckkiinngg
(doors lock only with the
transmitter). With Passive Locking, the vehicle doors lock
automatically 30 seconds after the ignition has been turned
off. Passive Locking can only be selected when the system
has been programmed for Passive Mode.
➤ The horn honk confirmations for locking and unlocking can
be programmed
oonn
or off. In order for this feature to work
properly, the horn must be connected to the system.
➤ Domelight supervision when the key is turned off can be pro-
grammed on or off. If programmed on, the domelight will
turn on for 30 seconds each time the ignition is turned off.