Filter
Top Products
7
© 2002 directed electronics, inc.
turned off. After the ignition has been turned off, the status LED
will flash rapidly to indicate that the system is in Passive Mode.
If Passive Mode has been programmed on, then it is also possible
to program the system for Passive Locking. With Passive Locking,
the vehicle doors lock automatically at the same time that the Failsafe
®
Starter Kill is activated. If Passive Locking is programmed on, care
must be taken to prevent the keys from being locked in the vehicle.
unlocking/disarming
Pressing for one second disarms the system and unlocks the
doors (if connected). The horn will honk twice (if connected) and
the parking lights will flash twice to confirm disarming of the
system. The optional Failsafe
®
Starter Kill will be deactivated. The
status LED will turn off, unless the system is programmed for
Passive Mode. In Passive Mode, the status LED will flash rapidly
when the system is disarmed. This indicates that the system will re-
engage the starter kill and re-lock the doors (if Passive Locking has
been programmed) in 30 seconds unless the ignition is turned on.
note: If the system has been armed with the remote trans-
mitter, you must use the transmitter or the Valet switch
to disarm the system and deactivate the starter kill.
Manually unlocking the vehicle does not disarm the sys-
tem; it will only unlock the doors.
➜
note: For Passive Mode to be effective, the Failsafe®
Starter Kill relay must be installed.