Directed Electronics 425 Automobile Alarm User Manual


 
9
©
1999 Directed Electronics, Inc.
Use Silent Mode to temporarily turn off the arm or disarm confir-
mation chirps by briefly pressing before either arming or
disarming. The confirmation chirp(s) will be eliminated for that one
operation only. To permanently turn off the arm and disarm chirps,
contact your dealer.
NOTE: The Warn Away Response to lighter impacts is bypassed if the sys-
tem is armed using the Silent Mode. This ensures that the siren does not
chirp in an environment where you don’t want chirps to be emitted. The
system is still capable of being triggered by heavier impacts; only the Warn
Away Response generated by light impacts is bypassed.
If you are threatened in or near your vehicle, press to trig-
ger your alarm system and attract attention. The siren will sound
and the parking lights will flash for 30 seconds. To stop the Panic
Mode at any time, press , , or .
Valet Mode prevents your system from arming and triggering ei-
ther automatically or with the transmitter. In Valet Mode, all
convenience functions (door locks, trunk release, etc.) will remain
operational. This feature is useful when washing or servicing
your vehicle.
Valet
®
Mode
Panic Mode
Silent Mode