Filter
Top Products
2
© 1997 Directed Electronics, Inc.
Button III
Button I
Button VI
Button V
Button II
Button IV
LED
Transmitter Channels
The receiver uses a computer-based Learn Routine
™
to learn the transmitter
buttons. This makes it possible to assign any button on the remote to any
receiver function. Two of the possible transmitter configurations are illustrated
below.
Standard Configuration
The standard configuration is how the transmitters come programmed initially.
If you would like a custom configuration, see your dealer.
Arm/Disarm/Panic
The arm/disarm/panic functions are usually controlled by Button I.
Function 2
The Silent Mode
™
, Remote Valet
®
, Trunk release functions are usually controlled
by Button II. (Silent Mode and Remote Valet work by pressing Button II for less
than one second.Trunk release requires you to press Button II for 1.5 seconds.)
Functions 3-6
These functions are assigned to transmitter buttons as shown in the diagram.
They are provided to control any convenience or expansion options you wish
to add to the system.