Filter
Top Products
29
© 2003 directed electronics, inc.
step 11
Testing the system
Once steps 1-9 have been completed, the operation of the
system can be tested.
Place the two 30-amp fuses back into the relay satellite red wire
fuse holders. Make sure that the vehicle is in park with the emer-
gency brake on and the hood closed. Press twice on the
remote control to initiate the remote start function. The parking
lights should flash to confirm the remote start command has
been received, The accessories and ignition should turn on
followed by the starter cranking and the vehicle engine running.
Pressing twice again will shut the engine off.
➜