Filter
Top Products
19
© 2003 directed electronics, inc.
BLACK/WHITE wire on the secondary connector and cover the
connection with electrical tape.
The shut down toggle switch is designed to shut the remote start
off in an emergency or to disable the remote start functions
temporarily (i.e., for service on the vehicle).
If your vehicle came with a factory neutral safety switch this
switch needs to be installed in line with the black/ white wire,
instead of soldering the black/ white wire to the factory neutral
safety wire solder the black/ white wire to one side of the switch
( it does not matter which side) and solder the other side to the
vehicle factory neutral safety switch.
step 5
Parking light flash
There are several different types of parking light circuits. The
following description is for a standard negative-triggered parking
light circuit, usually located at the light switch. If the web vehicle
information suggests a different type of parking light circuit,
please contact Rattler Technical Support.
➜
important! Do not use the vehicle until you confirm the
operation of the neutral safety feature.