Filter
Top Products
22
© 2011 directed electronics—all rights reserved
22
panic mode
If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your remote. Just press
for 1.5 seconds, and you will enter Panic Mode. The siren
will sound and the parking lights will flash for the programmed
siren duration.
To stop Panic Mode at any time, press
,
DRW-226
,
or
DRW-226
.
The LCD 2-way remote will beep (or vibrate) continuously
when the system enters panic mode. The 2-way remote will not
generate a page notification when panic mode is exited.
valet mode
You can prevent your security system from automatically arming
and trig ger ing by using Valet Mode. This is very useful when
washing the ve hi cle or having it serviced. In Valet Mode, the
security system will not arm, even with the remote, but all conve-
nience functions (door locks, trunk re lease, etc.) will continue to
work nor mal ly. You can access Valet Mode either manually or
with the remote.
To enter or exit Valet Mode manually:
1. Turn the ignition on.
DRW-35
2. Turn the ignition off.
3. Press and release the Valet
button within 10 seconds.
The status LED will light solidly if you are en ter ing Valet Mode,
and it will go out if you are exiting Valet Mode.