Filter
Top Products
20
© 2011 directed electronics—all rights reserved
20
high security disarm
This security system offers High Security Disarm. High Security
Disarm is a feature that makes it possible to silence and reset
the system while it is triggering, without disarming the system.
If the system is triggered and the siren has been sounding for
longer than six seconds, pressing
DRW-226
on the remote will stop the
trigger and return the unit to the armed state. The system will
not disarm, but rather reset. This prevents you from disabling the
system should you wish to disarm it without visually checking
the vehicle. Pressing
DRW-226
after resetting the system will disarm
the system; pressing this button during the first six seconds of the
trig gered sequence will disarm the security system immediately.
The six second timer is provided for your con ve nience, in case
the system is accidentally triggered.
disarming without a remote
If your remote is lost or damaged, you can manually disarm your
vehicle security system. To disarm the system without a remote,
you must have the vehicle’s ignition key and know where the
Valet button is located. Be sure to check with your installer at the
time of installation for the location of the Valet button.