Filter
Top Products
18
© 2011 directed electronics—all rights reserved
18
• Remote Control LCD - The full trigger alert icon (28) will
dimly illuminate for two seconds
• The transceiver will enter Page Recognition Mode and
operate alarm page alerts.
note: Icons 13 and 14 represent alarm system zone
inputs. For more information about icons and the
zones they represent refer to the Standard Remote
Configurations section.
triggered response description
A Triggered Response can be activated by any of the triggers
listed below and consists of an alarm page along with the response
described for each trigger. The Triggered Response duration is 30
seconds.
• Sensor Trigger - Heavy impacts to the vehicle will instantly
sound the siren and flash the lights for the programmed
duration and report Zone 2.
• Door Trigger - If a door is opened the siren will chirp for
three seconds, then the siren will sound and the lights will
flash for the programmed duration and report Zone 3. The
three seconds allow the user time to disarm the system with
a minimum of noise should a door be opened inadvertently
while the system is armed.
• Hood Trigger - Opening the hood (if connected) will sound
the siren, flash the lights for the programmed duration, and
report Zone 1.
• Trunk Trigger - Opening the trunk (if connected) will
instantly sound the siren and flash the lights for the
programmed duration and report Zone 1.