Filter
Top Products
18
©
2001 Directed Electronics, Inc.
QUICK REFERENCE GUIDE
Arming the system with your remote:
■ Press of your transmitter for one second. When the system arms,
you will hear a short siren sound, or chirp, and see the parking lights
flash once.
Disarming the system with your remote:
■ Press again. You will hear two chirps, and the parking lights will
flash twice.
Disarming the system without your remote:
■ Turn on the ignition. Press the Valet switch within 15 seconds. The
system should now disarm. If it does not disarm, you may have waited
too long to press the Valet switch; turn the ignition off and on and try
again.
Silent Mode
™
:
■ Press briefly before arming or disarming, and the confirmation
chirp(s) will be eliminated for that one operation only.
Panic Mode:
■ Press for 1.5 seconds, and you will enter Panic Mode. The siren will
sound and the parking lights will flash for 30 seconds. To stop Panic
Mode at any time, press on the transmitter again.
To enter or exit Valet Mode with the Valet switch:
■ Turn the ignition to the ON position, then turn to the OFF position.
Press and release the Valet switch within 10 seconds.
Remote Valet:
■ You can also enter or exit Valet Mode by using the remote transmitter.
First, open any vehicle door. Then press . Press . Press
again. The status LED will light solidly if you have entered Valet Mode
and will turn off if you have exited Valet Mode.
Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.
✂✂
✂✂