Filter
Top Products
9
©
2001 Directed Electronics, Inc.
Valet Mode prevents your security system from arming and trig-
gering either automatically or with the remote transmitter. In Valet
Mode, the system will not arm, but all convenience functions
remain operational. This feature is useful when washing or
servicing your vehicle. You can access Valet Mode either manually
or from the remote transmitter.
To enter or exit Valet Mode with the Valet switch:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet
switch within 10 seconds.
The status LED will light solidly if you are entering Valet Mode and
will turn off if you are exiting Valet Mode.
You can also enter or exit Valet Mode by using the remote
transmitter:
1. Open any vehicle door.
2. Press .
3. Press .
4. Press again.
The status LED will light solidly if you have entered Valet Mode and
will turn off if you have exited Valet Mode.
Remote Valet
®
DRW-35
Valet Mode