Filter
Top Products
14
©
2001 Directed Electronics, Inc.
The zone number is the number of LED flashes used by the
security system to identify a specific input. The standard input
assignments are listed in the following Table of Zones, along
with spaces to write in any optional sensors or switches you have
had installed.
ZONE
(Number of DEALER-INSTALLED
LED Flashes) DESCRIPTION OPTIONS
1
Instant trigger - used for
the mercury tilt switch
2 Impact detected by the
Double Guard
®
Shock Sensor
3 Instant trigger - optional closed loop
trigger for saddlebags or luggage carrier
4 Optional sensors
5 Ignition trigger
If the Warn Away
®
response is triggered, the LED will not report it.
Code-Hopping
®
The receiver and transmitters each use a mathematical formula
called an algorithm to change their code each time the transmitter
is used. This technology has been developed to increase the secu-
rity of the unit. The control unit knows what the next codes should
be. This helps to keep the transmitter "in sync" with the control
unit even if you use the remote control out of range of the vehicle.
Table of Zones