9P – 22 DOORS
DAEWOO M-150 BL2
D19C611A
Installation Procedure
Notice: Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use the correct
fastener to prevent premature corrosion.
1.Connect the body–to–door rubber grommet.
2. With the aid of another technician, lightly secure the
rear door with the bolts.
3. Adjust the door for proper fit.
4. Install the door hold open link with the bolt.
5. Connect the rear door electrical connector.
6. Connect the negative battery cable.
7. Perform the waterleak test. Refer to Section 9I, Wa-
terleaks.
8. Check for windnoise. Refer to Section 9J, Windnoise.
D109C612
TAILGATE
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the luggage compartment wheelhouse trim
panel. Refer to Section 9G, Interior Trim.
3. Disconnect the tailgate electrical connector.
a. Tailgate electrical connector.
D109C636
4. Remove the tailgate strut. Refer to “Tailgate Strut” in
this section.
5. Remove the tailgate.
D Remove the hinge bolts.
D Disconnect the body–to–tailgate rubber grommet.
D Remove the tailgate.
D19C613A