Filter
Top Products
9P – 16 DOORS
DAEWOO M-150 BL2
D109C588
CENTRAL DOOR LOCK ACTUATOR
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the door seal trim. Refer to “Door Seal Trim”
in this section.
3. Remove the door lock assembly. Refer to “Door Lock”
in this section.
4. Remove the actuator from the door lock assembly.
D Remove the screws (1).
D Remove the actuator (2).
D109C589
Installation Procedure
1. Install the door lock actuator to the door lock assem-
bly with the screws.
2. Install the door lock assembly to the vehicle. Refer to
“Door Lock” in this section.
3. Install the door seal trim. Refer to “Door Seal Trim” in
this section.
4. Connect the negative battery cable.
D109C590
TAILGATE LOCK
Removal Procedure
1. Remove the tailgate trim panel. Refer to Section 9G,
Interior Trim.
2. Remove the lock rod from the tailgate lock cylinder.
a. Lock rod.
D109C591
3. Remove the tailgate lock.
D Remove the screws (1).
D Remove the tailgate lock (2).