Filter
Top Products
Diesel Engine Complete Engine
72
Crankshaft Pulley
Align the crankshaft pulley with the crankshaft key.
Install the crankshaft pulley, mounting plate, and
capscrew.
Tighten the capscrew.
Torque Value: 93 N•m [69 ft-lb]
Lubricating Oil Suction Tube
Install a new o-ring, oil suction tube, and two
capscrews.
Tighten the capscrews.
Torque Value: 19 N•m [14 ft-lb]
Lubricating Oil Pan
NOTE: Apply a 1-mm [0.039-in] bead of gasket
sealant, Part No. 3823494, to the mounting
surface of the lubricating oil pan.
Install a new gasket, lubricating oil pan, and 24
capscrews.
Tighten the capscrews.
Torque Value: 32 N•m [24 ft-lb]
If the oil drain plug was removed, install the drain plug.
Torque Value: 51 N•m [38 ft-lb]
PTO Shaft (if applicable)
Align the gear of the PTO shaft with the surface teeth
of the camshaft gear.
Install the o-ring, flange, and two capscrews.
Tighten the capscrews.
Torque Value: 19 N•m [14 ft-lb]
00900180
00900179
00900178
00900177