Filter
Top Products
Diesel Engine Complete Engine
78
Spill Tube
Install the spill tube.
Intake Manifold
NOTE: Apply a 1-mm [0.039-in] bead of gasket
sealant, Part No. 3823494, to the mounting
surface of the intake manifold.
Install the air inlet connection, intake manifold, and
seven capscrews.
Tighten the capscrews.
Torque Value: 40 N•m [30 ft-lb]
Fuel Injection Tubing
NOTE: Before installing the fuel injection tubing,
blow compressed air through it to clean it.
Position the fuel injection tubing, and loosely install
the sleeve nuts on the fuel injection pump and the
cylinder head.
Tighten the clamp.
Tighten the banjo fittings
Torque Value: 20 N•m [15 ft-lb]
Exhaust Manifold
Install a new gasket, the exhaust manifold, and the
eight capscrews.
Tighten the capscrews.
Torque Value: 66 N•m [49 ft-lb]
00900166
00900164
00900163
00900162