Filter
Top Products
9
OPERATING INSTRUCTIONS - ALARM
Dome Light Illumination (Optional)
This feature will turn on the vehicle’s dome light upon disarming for 30 seconds or until the key is inserted and
turned on. This will provide illuminated entry to your vehicle in dimly lit areas for safety and security.
Emergency Override (Disarm)
If you have lost the transmitter or it stops working for any reason and the Alarm is armed, you will have to
disarm the system manually. Open the door with the key [alarm will sound], turn the ignition on, and press the
override/program button for about 5 seconds. The Alarm will disarm and allow you to use the vehicle until you
can repair/replace the remote. Valet mode also prevents Passive Arming.
Valet Mode (Enter manually or using the remote)
To disable Alarm and Remote Engine Starting for vehicle servicing the alarm system must be disarmed. To
Activate Valet Mode: Turn the ignition on and press the override/program button [about 5-6 seconds] until
you hear (3) siren chirps and the LED turns on solid. Repeat the process to exit VALET mode. To enter / exit
Valet via the remote, press and hold both the Lock and Unlock Button together for about 3 seconds until 3
chirps are heard. Repeat this step to exit via the remote transmitter. Lock / Unlock and AUX features will still
operate in VALET Mode however, Remote Start and Alarm functions are inhibited.
Valet Park Mode (Using the remote transmitter only)
Valet Park Mode allows you to turn over the vehicle to a Valet allowing access to drive/lock/unlock your
vehicle, but alarm will trigger if the trunk is opened. To Activate Valet Park: The alarm system must be
disarmed. Press and hold both the Lock and Unlock buttons together for about 3 seconds, 3 chirps will be
heard first when unit goes into regular Valet. Release, press and hold both buttons again, you will hear 2 more
chirps. The LED will always flash slowly when in Valet Park even when the Ignition is turned on (or driving
vehicle). Repeat step above to exit Valet Park Mode.
Note: Valet Park mode is only accessible when using the remote transmitter