Filter
Top Products
8
OPERATING INSTRUCTIONS - ALARM
Passive Locking: (Programmable)
The system can be programmed to passively lock the doors when the system passively arms. The default
setting is OFF because passive locking increases the risk of locking the keys in the vehicle when the system
arms/locks passively, without you pressing the remote.
Trunk/Hatch Pop (Optional, Remote AUX. Output 1)
This feature is designed to interface with existing Factory power trunk or power hatch release systems and
may require additional parts and/or labor charges. To eliminate the possibility of accidentally opening the
trunk, there are (3) options for button press selection. This option will allow you to change whether the Remote
starter and Trunk release activate by a:
1. Double button ½ second presses.
2. Single ½ second press.
3. Press and Hold 2 seconds.
*Default = Single ½ second press*
Remote AUX. Output 2 (Optional, Requires special programming)
This system contains a 2
nd
Auxiliary output to activate other accessories or devices. To activate the 2
nd
Auxiliary output, press the Unlock and Trunk button for more than 2 seconds. This momentary output will stay
active as long as the remote button is held down. There is no LCD / Pager confirmation for Aux. 2 output.
Remote AUX. Output 3 (Optional, Requires special programming)
This system contains a 3
rd
Auxiliary output to activate other accessories or devices. This output is
programmable for a momentary, timed or Latch output. There are 2 ways to control this output. To activate the
Third Auxiliary Output:
1. Press the 2
nd
Function button, than press the Trunk button on the transmitter.
2. Press the Lock and Key Button at the same time.
Remote AUX. Output 4 (Optional, Requires special programming)
This system contains a 4
th
Auxiliary output to activate other accessories or devices. This output is
programmable for a momentary, timed or Latch output. There are 2 ways to control this output. To activate the
Forth Auxiliary Output:
1. Press the 2
nd
Function button, than press the Lock button on the transmitter.
2. Press the Trunk and Start Button at the same time.