Filter
Top Products
USING THE REMOTE TRANSMITTER (RS900)
The transmitter supplied with this system has Four (4) buttons / channels. The button configuration is Factory-set
and unchangeable. (RS901 model does not include remote transmitters: For add-on / OEM use only)
#3
#1
TRANSMITTER BUTTONS
#2
#4
START
LOCK
TRUNK
REMOTE
START
UNLOCK
#5
CAR 1-2
REMOTE ENGINE CONTROL
REMOTE ENGINE STARTING - SUCCESSFUL START:
1) Press and release the remote start button. (For RS901 models, activate Green Start input wire.)
2) Parking lights flash once, then turn on solid, Ignition/Acc On turn on.
3) After a few seconds the Starter Motor engages, Parking lights and Acc circuits will turn off while cranking.
4) Engine Starts and Runs. Parking Lights and Acc turn back on, Doors Lock.
5) Engine will remain running for programmed run time until reset with Brake pedal. If needed, the engine can be
turned off with remote transmitter by pressing and releasing the Start button. (For RS901 model, activate the Green
Start input wire.