Filter
Top Products
Cold/Hot Start Mode
Cold/hot start mode works in conjunction with timer start mode (see above) and the temperature sensor.
It allows you to configure your timer start feature to check the vehicles temperature prior to starting. All of
these options require programming from your local CompuStar dealer.
Cold Start Settings (Option 2-8); Hot Start Settings (Option 2-9);
Default 1: Off Default 1: Off
Option 2: -10º C / 14º F Option 2: 30º C / 86º F
Option 3: -5º C / 14º F Option 3: 35º C / 95º F
Option 4: 0º C / 32º F Option 4: 40º C / 104º F
Anti Jacking Mode
The CompuStar systems have a built in mode that would require you to keep your remote separate from
your key chain. This feature also requires additional labor. Please consult your installer for more details.
The Anti Jacking mode allows you to safely disable your vehicle once a thief has driven off with your
property. If you are car jacked and still have your remote, you can panic the system by holding button
down for 4 seconds. The siren will sound for 30 seconds and the motor of the vehicle will shut
down.
Remote Coding / Programming Routine(s)
IMPORTANT: Every CompuStar Pro remote must be coded to the system prior to performing any
operations. All remotes must be coded at the same time.
Programming P2WSHLEDR
STEP 1: Activate Valet/Programming mode by manually turning the ignition key on and off (between the
Acc & On positions) five times within 7 seconds. The vehicle’s parking lights will flash once with the
successful completion of this step.
STEP 2: Within a 5 second period after cycling the ignition for the 5
th
time, press button on two-
way LED remotes or the (lock) button on one-way remotes for 0.5 seconds. The parking lights will flash
once to confirm the transmitter has been coded.
Exiting Programming: Programming is a timed sequence. The parking
lights will flash twice signaling the end of programming mode.
Programming Multiple Remotes: After the confirmation flash given in
step 2, code additional remotes by pressing button
on two-way
LED remotes or the (lock) button on one-way remotes. The parking
lights will flash once confirming each additional remote. All systems can
recognize up to three remotes.
13