Filter
Top Products
Nothing comes close to a Cobra
®
23
Settings
Intro Operation Customer
A
ssistance
Warranty
N
otice
Secondary Icons
Y
our Detector
22
English
DigiView Data Display Brightness
Your detector has a Bright display mode (for daytime driving) and three
levels of
Dim display modes (Dim for dusk driving, Dimmer for night driving
and
Dark where no visual alerts will be displayed) to control the display’s
brightness levels. The factory setting is Bright. The factory Dim mode
default setting is Dimmer.
Select/Dim Button
Press and release
Dark Indicator
.
To change the Brightness to Dim
Press and release the
Select/Dim button once.
Tone
Visual Display Voice
Two beeps Dim, Dimmer
or Dark
Dim, Dimmer
or Dark
To change the Brightness to Bright
Press and release the
Select/Dim button again.
Tone
Visual Display Voice
One beep Bright Bright
NOTE
When you change to Dim mode, the unit will enter whichever
dim default mode is set at the time.
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Dim Display
Dim
Bright Display
Bright
Dimmer Display
Dimmer
Dark Display
Dark
Settings
Intro Operation Customer
A
ssistance
Warranty
N
otice
Secondary Icons
Y
our Detector
SmartPower
Your detector includes the SmartPower feature that, when activated,
will put the unit into Standby mode (low power) for about 30 minutes
after the car’s engine has been turned off. After 30 minutes in Standby
mode, the unit will automatically turn off.
Before SmartPower enters Standby mode, you will hear one beep and
Pwr Save will appear on the display. To return the unit to normal Power
mode or exit Standby mode, start the car, press any button or turn the unit
off and then on again. The factory setting is SmartPower on.
SmartPower Entering
Standby Mode
Pwr Save
SmartPower Off
...Power off
SmartPower On
...Power on
To turn SmartPower Mode off or on using Program Mode
(See page 7 for instructions on using Program Mode)
In Program mode,
go to SmartPower.
Tone Visual Display Voice
One beep SmartPower Off SmartPower Off
Two beeps SmartPower On SmartPower On