Filter
Top Products
Nothing comes close to a Cobra
®
21
Settings
Intro Operation Customer
A
ssistance
Warranty
N
otice
Secondary Icons
Y
our Detector
20
English
Spectre 1 Alert
The detector is undetectable by Spectre 1 detection devices and will alert you
when such a device is in use near your vehicle. During the alert, the unit
continues to detect other signals. You can choose whether or not you want
your unit to show
Spectre 1 Alerts. With Spectre 1 Detect mode on, you can
also choose whether or not you want your unit to sound audible Spectre 1
Alerts. The factory settings are Spectre 1 Detect on, Spectre 1 Audio on.
Spectre 1 Detect Off
Spectre Off
Spectre 1 Detect On
Spectre On
Spectre 1 Audio Off
...Audio Off
Spectre 1 Audio On
...Audio On
To turn Spectre 1 Detect Mode off or on using Program Mode
(See page 7 for instructions on using Program Mode)
In Program mode,
go to Spectre 1 Detect.
Tone Visual Display Voice
One beep Spectre Off Spectre Off
Two beeps Spectre On Spectre On
To turn Spectre 1 Mode off or on using Program Mode
(See page 7 for instructions on using Program Mode)
In Program mode,
go to Spectre 1 Audio.
Tone Visual Display Voice
One beep Spectre Audio Off Spectre Audio Off
Two beeps Spectre Audio On Spectre Audio On
Settings
Intro Operation Customer
A
ssistance
Warranty
N
otice
Secondary Icons
Y
our Detector
To turn VG-2 Detect Mode off or on using Program Mode
(See page 7 for instructions on using Program Mode)
In Program mode,
go to VG-2 Detect.
Tone Visual Display Voice
One beep VG2 Off VG2 Off
Two beeps VG2 On VG2 On
To turn VG-2 Audio Mode off or on using Program Mode
(See page 7 for instructions on using Program Mode)
In Program mode,
go to VG-2 Audio.
Tone Visual Display Voice
One beep VG2 Audio Off VG2 Audio Off
Two beeps VG2 Audio On VG2 Audio On
VG-2 Detect Off
VG2 Off
VG-2 Detect On
VG2 On
VG-2 Audio Off
...Audio Off
VG-2 Audio On
...Audio On
VG-2 Alert
The detector is undetectable by VG-2 detection devices and will alert you
when such a device is in use near your vehicle. During the alert, the unit
continues to detect other signals. You can choose whether or not you want
your unit to show
VG-2 Alerts. With VG-2 Detect mode on, you can also
choose whether or not you want your unit to sound audible VG-2 Alerts.
The factory settings are VG-2 Detect on and VG-2 Detect Audio on.