Filter
Top Products
English
16
Settings
Your Detector
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Nothing Comes Close to a Cobra
®
17
Your Detector
Intro Operation Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Radar Alert Settings
XKKaKu
To Turn X Band On and Off
While no signal
is being detected,
press and hold both
the Mark/Dim and
Mute buttons for
four seconds.
Tone Voice Visual Display
X On = Two beeps X Band On X On blinks in the
display
X Off = One beep X Band Off X Off blinks in the
display
To Turn K Band On and Off
While no signal
is being detected,
press and hold both
the Mute and City
buttons for
four seconds.
Tone Voice Visual Display
K On = Two beeps K Band On K On blinks in the
display
K Off = One beep K Band Off K Off blinks in the
display
To Turn Ku Band On and Off
While no signal
is being detected,
press and hold the
City/Hwy button for
four seconds.
Tone Voice Visual Display
Ku On = Two beeps Ku Band On Ku On blinks in the
display
Ku Off = One beep Ku Band Off Ku Off blinks in the
display
To Turn Ka Band On and Off
With unit power Off,
press and hold the
Mute button. Then
turn the power On
and continue to hold
the Mute button for
two seconds.
Tone Voice Visual Display
Ka On = Two beeps Ka Band On Ka On blinks in the
display
Ka Off = One beep Ka Band Off Ka Off blinks in the
display
Pop Alert
The Pop Mode Radar Gun is a single-pulse Doppler radar that is a feature of a
K and Ka (Bee III Ka radar gun) band Instant-On radar gun. It uses a single,
short-time pulse to measure the target vehicle’s speed.
The Pop mode receiver senses Pop signals beyond the effective range of Pop radar
guns. As the Pop mode receiver is so sensitive, you should limit the use
of Pop Detect mode to highway and rural driving.
Pop Alert will alert you to Pop radar signals. During the alert, the unit continues
to detect other signals. The factory setting is Pop Detect Off.
To Turn Pop Alert On and Off
While no signal
is being detected,
press and hold both
the Mark/Dim and
City/Hwy buttons for
four seconds.
Tone Voice Visual Display
Pop On =
Two beeps
Pop Alert On Pop Alert On blinks in
the display
Pop Off =
One beep
Pop Alert Off Pop Alert Off blinks in
the display