Filter
Top Products
3
OPERATION•SETTINGS
3
OPERATION•SETTINGS
11
10
Weather/All Hazards Alert
Radio Mode
The Weather/All Hazards Alert Radio feature
of your ESD-9230 WX allows you to listen to
Weather/All Hazards Alert Radio transmitted
by National Oceanic and Atmospheric
Administration (NOAA) in your area. In
Weather mode, your unit will continue to
detect radar signals and provide alerts.
The factory setting is Weather Off.
Selecting a
Weather Channel
2.
Procedure
Press and release the
WX button to activate
Weather/All Hazards Alert
Radio mode. If a signal is
received, you will hear
the radio broadcast.
Tone
2 beeps
Voice
”weather on”
Visual Display
Wx
Tone
1 beep
Voice
”weather off”
Visual Display
none
Procedure
To turn off Weather mode,
press and release the
WX button again.
NOTE: The Wx in the LED acts as a signal strength meter. A weak signal will cause it to flicker.
VG-2 Alert
®
Audio Setting
The ESD-9230 WX is undetectable by police
VG-2 detection devices, and will alert you
when such a device is in use near your
vehicle. During the alert, the unit continues
to detect other signals. You can choose
whether or not you want your unit to
sound VG-2 alerts.
The factory setting is VG-2 Audio On.
X
K
/Ka L V S
Cty Wx
X
K
/
Ka
L V S
Cty Wx
DIM button
Press and hold for 2 seconds
WX button
Press and release
To turn off
VG-2
audio alert
To turn on
VG-2
audio alert
Procedure
While no signal is
being detected,
press and hold
the DIM button
for two seconds.
While no signal is
being detected, press
and hold the DIM
button for two
seconds again.
Tone
1 beep
2 beeps
Voice
”VG-2
audio off”
”VG-2
audio on”
Visual Display
V
will blink
once in
the display
V
will blink
twice in
the display.
1 beep
“weather signal
lost”
none
If the signal is lost, your unit
will automatically return to
radar mode.
1.
Procedure
If you do not hear a
broadcast, press and
release the CITY/Wx
(STEP) button to cycle
through the 10 channels
until a signal is received.
Tone
none
Voice
none
Visual Display
none