Filter
Top Products
UltraBright™ Data
Display Brightness
You can choose from three settings for
brightness of the display.
You can cycle through the settings
by repeatedly pushing the DIM button
The factory setting is Bright.
3
OPERATION•SETTINGS
3
OPERATION•SETTINGS
7
6
X
K
/Ka L V S
Cty Wx
X
K
/Ka L V S
Cty Wx
City mode Highway
mode
When changing the settings on your
ESD-9230 WX, please keep in mind:
• Buttons can have multiple functions.
• Depending on your choice of Voice Alert™
or Tone Alert mode, you will hear either
voice messages or tones confirming
changes in settings.
• All settings will be stored in memory
when the power is turned off and recalled
when the power is turned back on.
Highway/City Mode
Setting your ESD-9230 WX to City mode
delays all X band audio alerts until the
signal strength reaches level 3. (A single
beep will sound when the signal is first
detected.) This will reduce false alerts while
you are driving in or near urban areas
where there are many sources for conflicting
X band signals such as microwave towers
and automatic door openers.
To change settings, follow the procedure in
the table below, which indicates what you
will see and hear (either in Voice Alert™ or
Tone Alert mode) as you complete each step.
The factory setting is Highway mode.
To change from
Highway mode
to City mode
To change from
City mode back
to Highway
mode
Procedure
Press and release
the CITY/Wx
button.
Press and release
the CITY/Wx
button again.
Tone
1 beep
2 beeps
Voice
”city“
”highway“
Visual Display
appears in
the display
none
DIM button
Press and release
D
I
M
/
M
O
D
E
B
U
T
T
O
N
P
R
E
S
S
&
R
E
L
E
A
S
E
D
I
M
/
M
O
D
E
B
U
T
T
O
N
P
R
E
S
S
&
R
E
L
E
A
S
E
D
I
M
/
M
O
D
E
B
U
T
T
O
N
P
R
E
S
S
&
R
E
L
E
A
S
E
D
I
M
/
M
O
D
E
B
U
T
T
O
N
P
R
E
S
S
&
R
E
L
E
A
S
E
Dark
Bright
Dim
To change
the brightness
to Dim
To change
the brightness
to Bright
To change
the brightness
to Dark
CITY/Wx button
Press and release
Procedure
Press and release
the DIM button
once.
Press and release
the DIM button
again.
Press and release
the DIM button
a third time.
Tone
1 beep
1 beep
2 beeps
Voice
”dim“
”dark“
”bright“
Visual Display
Display dims
Display remains
dim (No visual
alerts will be seen)
Display returns
to full brightness
Cty