32
© 2002 directed electronics, inc.
To exit Timer Mode:
Timer Mode can be exited by turning the ignition on with the
key any time that the vehicle engine is not running. You can also
exit Timer Mode using the transmitter by following these steps:
1. Start the engine by pressing and on the remote
control simultaneously.
2. Press and release on the remote control.
3. Within two seconds, press and release and on the
remote control again.
4. The vehicle engine will shut down and the parking lights
will flash four times to confirm that Timer Mode has been
exited. If the vehicle has already been remote started, you
may skip Step One.
5. The remote control will generate normal remote start and
shutdown Page Notifications when entering/exiting timer
mode and during programmed start times only when
remotely activated. When exiting timer mode with the igni-
tion, no page notification will be generated.