Filter
Top Products
21
© 2002 directed electronics, inc.
until a remote control button is pressed, clearing the page alert.
➤ The remote control will enter Page Recognition Mode and
generate alarm page alerts.
arming/disarming while driving
The alarm system can operate while the vehicle is being driven for
added safety when driving through areas of questionable security.
The alarm will only respond to the door trigger inputs and the
Fail-Safe starter kill will not be activated.
Arming while driving
Press for two seconds while the vehicle is running. The
vehicle’s siren will chirp, the lights will flash, and the doors will
lock (if unlocked). Then a Bypass Notification chirp will be heard
and the status LED will blink in a pattern of five indicating the
ignition is on.
The remote control will beep once (or vibrate). The arm icon (7) will
flash for three seconds and the armed status icon will be displayed on
the LCD. It will then generate a Bypass Notification beep and flash
the ignition input indicator icon (15) five times.
➜
note: Icons 14, 15, 16, 17, 18, and 19 represent alarm
system triggered sequence zone inputs. For more infor-
mation about icons and the zones they represent refer to
the Standard Remote Configurations section.