Clifford RSIII Automobile Alarm User Manual


 
28
© 2002 directed electronics, inc.
remote start
This feature allows you to remotely start and run your vehicle for
a programmable period of time. This makes it possible to warm up
the engine, as well as adjust the interior temperature of the vehicle
with the climate control system. If interior heating or cooling is
desired, the climate controls must be preset, and the fan blower
must be set to the desired level prior to remote starting the vehicle.
To remote start the vehicle:
1. Simultaneously press and on the remote control
for one second.
2. The parking lights will flash to confirm that the vehicle will
attempt to start.
3. A remote start Page Notification with a unique two-tone
beep (or vibration) will be generated and the LCD will
display the Start (20) icon as long as the vehicle is running.
4. In gasoline vehicles, the engine will start 4 seconds after the
parking lights flash. In diesel vehicles, the engine will start
when the WAIT-TO-START indicator on the vehicle's dash
goes out.
note: the remote will generate a Page Notification with a
different unique two-tone beep (or vibrate) and the Start
(20) icon will turn off when the remote start shuts down
iimmppoorrttaanntt!!
(1) Never remote start your vehicle when the
keys are in the ignition, except when performing Valet
®
Take-Over, and (2) Never start the vehicle if it is not in
either PARK or NEUTRAL.